SAF-T-EZE® Regular Grade Anti-Seize is produced from copper, aluminum and graphite. It has thousands of applications but the primary contribution to performance lies in the ability to resist corrosion. Even in the presence of strong chemicals such as caustic solutions and acids including dilute sulphuric, hydrochloric and nitric, a quality Anti-Seize will continue to resist galvanic attack by sacrificing the metals in the anti-seize in preference to the metal parts under protection.

SAF-T-EZE® Copper Grade Anti-Seize is produced from copper and graphite. The properties are similar to Regular Anti-Seize but without the aluminum present. The copper color is apparent

SAF-T-EZE® Nickel Grade Anti-Seize is compounded from fine particles of nickel, aluminum and graphite in a heat resistant lubricant and performs particularly well as nickel lubricates and keeps the metallic surfaces apart even under high pressure. It is recommended when very different metals are used together such as brass and steel or where high nickel alloy metals such as stainless steel are involved. Nickel Anti-Seize is also used where soft metals such as copper cannot be present, and it performs to 2600ºF (1425ºC).

SAF-T-EZE® Food/Drug Grade Anti-Seize has been formulated to meet rigorous USDA requirements. This product is odorless, tasteless, non-staining and corrosion resistant.

SAF-T-EZE® Food/Drug Grade Anti-Seize is listed for incidental food contact by the United States Department of Agriculture for use in establishments operating under the Federal Meat and Poultry Products Inspection Program. This Anti-Seize grade is also NSF registered.

Service temperature for long term application is from -65ºF to 450ºF, but intermittent spikes to 500ºF are possible. This superior product prevents galling on threaded joints and metal wear surfaces. It performs particularly well on stainless steel. SAF-T-EZE Anti-Seize stops corrosion, galling, and seizure between metal parts.

SAF-T-EZE® Moly Grade Anti-Seize is compounded with Molybdenum Disulfide for extreme pressure applications. This low friction lubricant even prevents wear or galling on gears or splines operating under high load at low speed.

In fact Moly Grade Anti-Seize will withstand pressure to 500,000 psi and perform to 650ºF (340ºC) Moly Grade and Moly 50 are not recommended where moisture is present and high temperature encountered, however. For performance to 1500ºF (815ºC)., see the Blue Moly Grade Anti-Seize or Dry Moly Film for performance to 2400ºF (1315ºC).

SAF-T-EZE® GP - Aircraft Grade Anti-Seize is compounded from graphite and petrolatum to satisfy the requirements of MIL-T-5544 and SAE AMS-2518 for use on threaded joints. This anti-seize is a NATO defined product S-720 for aircraft spark plugs.

SAF-T-EZE® ZP - Aircraft Grade Anti-Seize is compounded from zinc and petrolatum to meet MIL-T-22361 and A-A-59313 requirements for use on threaded steel parts assembled in aluminum or zinc castings. SAF-T-EZE Aircraft Grades Anti-Seize are also used in other than aircraft precision applications. They do not contain lead, copper or molybdenum disulfide. Certificates of conformance are available for each batch.

SAF-T-EZE®Nuclear Nickel Grade Anti-Seize is formulated from the highest purity grease to minimize sulphur, halogens, mercury, etc. This product meets MIL-A-907D, MIL-PRF-907E and exceeds the requirements of General Electric, Bechtel and Westinghouse.

SAF-T-EZE® Marine Grade Anti-Seize provides protection as a high temperature anti-seize and extreme pressure lubricant. It stops corrosion, galling and seizure between metal parts. Marine Grade Anti-Seize provides ultimate protection as a high temperature anti-seize and extreme pressure lubricant and is recommended for service to 2000ºF.

SAF-T-EZE® Marine Grade Anti-Seize is formulated to prevent rust and galling in fresh or salt water. It is compounded from a heat resistant lubricant developed to prevent water wash out. Marine Grade Anti-Seize is the best choice above or below the water line and meets MIL-A-907D and MIL-PRF-907E. 

SAF-T-EZE® Stainless Steel Grade Anti-Seize provides ultimate protection as a high temperature anti-seize and extreme pressure lubricant. Stainless Steel Anti-Seize stops corrosion, galling and seizure between metal parts and is recommended for service to 2500ºF.

SAF-T-EZE® Stainless Steel Grade Anti-Seize is a smooth, non-separating formula consisting of a lithium soap thickened grease into which is compounded to Stainless Steel, aluminum as well as graphite lubricants and corrosion fighting inhibitors.

This high performance grease and solid additives provide extreme pressure lubricating properties that prevent galling and cold welding and at the same time prevent water wash out and galvanic pitting from electrolysis of road salt, acid rain or salt water. The particles present are inert and will not evaporate at extreme temperatures and their heat resistant qualities will prevent carbon fusion and seizure at temperatures approaching 2500ºF (1370ºC). This anti-seize compound does not contain lead, molybdenum disulfide or halogen compounds.

SAF-T-EZE® Non-Metallic White Anti-Seize is metal free and recommended where copper must be avoided. It is an excellent anti-seize for titanium, stainless steel and other alloy steels. It prevents corrosion, galling, and seizure between metal parts, and is recommended for service up to 2400ºF (1315ºC).

SAF-T-EZE®  Non-Metallic White Anti-Seize has been specifically formulated to meet the requirements of extreme high temperature applications. Non-Metallic White Anti-Seize does not contain copper, nickel or any metallic ingredients.

SAF-T-EZE® GP - (Aircraft Grade) Anti-Seize is compounded from graphite and petrolatum to satisfy the requirements of MIL-T-5544 and SAE AMS for use on threaded joints. This anti-seize is a NATO defined product S-720 for aircraft spark plugs

SAF-T-EZE® ZP - (Aircraft Grade) Anti-Seize is compounded from zinc and petrolatum to meet MIL-T-22361 and A-A-59313 requirements for use on threaded steel parts assembled in aluminum or zinc castings. SAF-T-EZE Aircraft Grades Anti-Seize are also used in other than aircraft precision applications. They do not contain lead, copper or molybdenum disulfide. Certificates of conformance are available for each batch.